Samsung CLX 3160FN - Color Laser - All-in-One Service Manual Download Page 72

Page: 72 / 204

Disassembly and Reassembly

Samsung Electronics

Service Manual

5-7

5.8 OPE Unit

1. Before you remove the OPE Unit, you should remove:

- Cover Upper L, R (Refer to 5.2)

2. Remove the two screws securing the OPE Unit to the

Platen Ass'y.

3. Apply light pressure to the front of the OPE Unit and

pull it in the direction of arrow, as shown below.

4. Unplug the three connectors from the OPE PBA, as

shown below.

5. Remove the nine screws securing the OPE PBA to

the OPE Cover.

LCD
Cover

OPE PBA

OPE Cover

OPE Unit

Summary of Contents for CLX 3160FN - Color Laser - All-in-One













































































































































































































Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands

Samsung CLX 3160FN - Color Laser - All-in-One, Service Manual

Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands