Samsung CLX 3160FN - Color Laser - All-in-One Service Manual Download Page 122

Page: 122 / 204

Alignment and Adjustmens

Samsung Electronics

Service Manual

6-23

6.8 Tech Mode

6.8.1 How to Enter Tech Mode

In service (tech) mode, the technician can check the machine and perform various test to isolate the cause
of a malfunction.

While in Tech mode, the machine still performs all normal operations.

To enter the Tech mode

To enter the Tech mode, press

in sequence, and the

LCD briefly displays ‘TECH’, the machine has entered service (tech) mode.

Summary of Contents for CLX 3160FN - Color Laser - All-in-One













































































































































































































Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands

Samsung CLX 3160FN - Color Laser - All-in-One, Service Manual

Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands