Samsung CLX 3160FN - Color Laser - All-in-One Service Manual Download Page 150

Page: 150 / 204

Troubleshooting

Samsung Electronics

Service Manual

7-15

The printer does not print a docu-
ment from Acrobat Reader.

You should change the Print Method option to Print as Image when you print
from Acrobat Reader.

Condition

Suggested solutions

The document has printed, but the
print job has not disappeared from
the spooler in Mac OS 10.3.2.

Update your Mac OS to OS 10.3.3. or higher.

7.2.10 Common Macintosh problems (CLX-3160FN only)

Summary of Contents for CLX 3160FN - Color Laser - All-in-One













































































































































































































Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands

Samsung CLX 3160FN - Color Laser - All-in-One, Service Manual

Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands