Samsung CLX 3160FN - Color Laser - All-in-One Service Manual Download Page 89

Page: 89 / 204

Samsung Electronics

Service Manual

Disassembly and Reassembly

5-24

1. Before you remove the Main Drive Ass'y, you should

remove:

- LIU Unit (Refer to 5.15)
- Shield Main Lower(with Main PBA) (Refer to 5.16)

2. Release the Harness and Cable from the Cable

Clamp, as shown below.

3. Remove the nine screws securing the Main Drive

Ass'y and remove it, as shown below.

Notice: The eight screws have numbers stamped into

the Main Drive Ass'y base plate.
When refitting the Main Drive Ass'y tighten the
screws the order they are numbered.

5.17 Main Drive Ass'y

Cable Clamp

Main Drive Ass'y

Summary of Contents for CLX 3160FN - Color Laser - All-in-One













































































































































































































Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands

Samsung CLX 3160FN - Color Laser - All-in-One, Service Manual

Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands