Samsung CLX 3160FN - Color Laser - All-in-One Service Manual Download Page 87

Page: 87 / 204

Samsung Electronics

Service Manual

Disassembly and Reassembly

5-22

5.15 LIU Unit

1. Before you remove the LIU Unit, you should remove:

- Side Cover Right (Refer to 5.9)
- Harness Guide (Refer to 5.11.3)

2. Unplug the Film Cable from the LIU PBA.

3. Remove the three screws securing the LIU Unit and

remove it, as shown below.

4. If necessary, remove the LIU PBA from the

Supporters, as shown below.

Film Cable

Supporter

LIU PBA

Sheet LIU

LIU Unit

Summary of Contents for CLX 3160FN - Color Laser - All-in-One













































































































































































































Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands

Samsung CLX 3160FN - Color Laser - All-in-One, Service Manual

Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands