Troubleshooting
Samsung Electronics
Service Manual
7-7
Page skew
Ensure that the paper is loaded properly.
Check the paper type and quality.
Ensure that the paper or other material is loaded correctly and the guides are not too
tight or too loose against the paper stack.
Condition
Suggested solutions
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Curl or wave
Ensure that the paper is loaded properly.
Check the paper type and quality. Both high temperature and high humidity can cause
paper curl.
Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Wrinkles or creases
Ensure that the paper is loaded properly.
Check the paper type and quality.
Turn the stack of paper over in the paper tray. Also try rotating the paper 180° in the
tray.
Back of printouts
aredirty
Check for leaking toner. Clean the inside of the machine.
Aa
Bb
Cc
Aa
Bb
Cc
Aa
Bb
Cc
Aa
Bb
Cc
Aa
Bb
Cc
Solid Color or
Black pages
The toner cartridge may not be installed properly.
Remove the toner cartridge and reinsert.
The toner cartridge may be defective and need replacing. Remove the toner cartridge
and install a new one.
The machine may require repair. Contact a service representative.
A
Summary of Contents for CLX 3160FN - Color Laser - All-in-One
