Sagem F@st 1704 Reference Manual Download Page 19

Page: 19 / 202

2 - Description and connection of your router

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Page

2-3

Sagem Communications SAS

document. Reproduction and disclosure prohibited

2.1.1

Connectors

Marking

Meaning

LINE

RJ11 connector - 6 pts. This connector is identified by the colour grey.

It is used for the connection to an ADSL line (WAN interface).

LAN

(

)

RJ45 connectors - 8 pts (10/100BASE-T Ethernet Interface). These connectors are
identified by the colour yellow.

They are used to connect to a computer or a television set (via a TV/Video Decoder).

Power

Miniature jack fixed connector.

This connector enables the router to be supplied with direct current from a mains
adapter unit.

Reset

This button allows the router to be reset to the factory configuration (see § A.7).

Note:

To prevent an accidental loss of configuration, the router is reset relative to the

other elements.

WLAN/WPS

This button allows the router to switch to easy-pairing mode.

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands