2 - Description and connection of router
Page 2-6
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
2.3
Installing your SAGEM F@st
TM
1704
2.3.1
Powering up
1.
First connect the end of the mains adapter lead, supplied with the equipment, to the Power
socket on your router.
2.
Connect the other end of the mains adapter lead to a nearby power outlet.
3.
The router switches on.
4.
The
LED will light up first, followed by the four Ethernet LEDs (1 to 4), then these last
four LEDs will be off. The
and Ethernet (which corresponds to the connected interface)
LEDs should be steady and the
LED blinks during the establishment of the ADSL link,
then steadies like the
LED. The
LED should be steady and turn from "Red" to
"Green" when a PPP session has been created.
Note
The powering up process lasts around one minute.
2.3.2
Connecting the ADSL cable
1.
Connect one end of the RJ11/RJ11 cable supplied with the equipment to the LINE socket of
your router.
2.
Connect the other end of the cable as shown in the Figure 2.3.
Summary of Contents for F@st 1704
Page 1: ...SAGEM F stTM 1704 Reference Manual Edition of October 2009 253 272 861 A ...
Page 2: ......
Page 201: ......
