Sagem F@st 1704 Reference Manual Download Page 131

Page: 131 / 202

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Page 5-95

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.8.2

Security

Object:

The purpose of this menu is to secure your wireless network (Wi-Fi). All types of

ingenious solutions have been deployed to combat attacks from hackers. Encryption
modes have been implemented to secure your wireless network. Among these, two
are commonly used:

•

WEP (

ired

quivalent

rotocol),

•

WPA (

i-Fi

rotected

ccess) and its derivatives (WPA-PSK, WPA2 etc.).

The WPA encryption mode is the most robust and the best adapted to correctly
securing your wireless network.

•

In the

Wireless

menu, select

Security

The following screen opens:

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands