Sagem F@st 1704 Reference Manual Download Page 121

Page: 121 / 202

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Page 5-85

Sagem Communications SAS

document. Reproduction and disclosure prohibited

Add

•

Click on the

Add

button to display

the following screen:

Field

Meaning

Group Name

Enter a name which represents the service you want to
associate with a desired interface (for example “video_eth” if
you want to associate the TV over UP service with the
interface (Ethernet)).

WAN Interface used in

the grouping

Select the WAN interface you want to use in the grouping.

Grouped LAN Interface

Displays the interfaces associated with a service you selected
in the

Available LAN Interfaces

area then transferred with

the

button.

Available LAN Interfaces

Lists all your router's interfaces.

Note:

Only the "nas_8_50" interface is not resident on the

router. It corresponds to a "Bridge" ATM interface.

Button

Action

Transfer the interfaces selected in the

Available LAN

Interfaces

area to the

Grouped LAN Interfaces

area.

Transfer the interfaces selected in the

Grouped LAN

Interfaces

area to the

Available LAN Interfaces

area.

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands