Sagem F@st 1704 Reference Manual Download Page 112

Page: 112 / 202

5 - Information / Configuration

Page 5-76

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.7.10

DNS

5.7.10.1 DNS

Server

Object:

This menu enables the automatic resolution of domain names by polling remote

servers.

•

In the

Advanced Setup

menu, select

DNS

then select

DNS Server

The following screen opens:

Field

Action

Default

value

Obtain DNS info from a

WAN interface

Check the box to obtain DNS server addresses
automatically, and select the desired interface in
the list

WAN Interface selected

Checked

Use the following Static

DNS IP address

If you check this box, you must enter DNS server
addresses.

Not

checked

Primary DNS server

Enter a primary DNS server address.

Secondary DNS server

Enter a secondary DNS server address.

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands