5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-49
Sagem Communications SAS
document. Reproduction and disclosure prohibited
•
Check the
Select a Service
box, then select the service of your choice from the scroll down
list, for example "SNMP".
The
External Port Start
,
External Port End
,
Internal Port Start
,
Internal Port End
and
Protocol
fields (transport protocol associated with this service) are automatically filled in
the table.
Note
You may complete the table by adding other ports associated with a protocol.
or
•
Check the
Custom Service
box, enter the name of the server you want to connect to, then:
•
Complete the ID Host of your computer's IP address (this is attributed by your router's
DHCP server).
•
Fill in the
External Port Start
,
External Port End
,
Internal Port Start
,
Internal Port End
and
Protocol
fields.
A few rules for entering values:
•
When you want to select a single port, the start port (
External Port Start
or
Internal Port
Start
) and the end port (
External Port End
or
Internal Port End
) must be identical.
•
When you want to select a range of ports, the start port number must be lower than the end
port number.
•
You must always start entering with the
External Port Start
and
External Port End
ports.
•
When you allocate a number to an
External Port Start
, the same number is automatically
allocated to the
Internal Port Start
and identically for
External Port End
.
The following diagram contains an example:
The "Delta Force 2" service is available on your computer via the external ports 3568 and 3569
(WAN side) and via the internal ports 3568 and 3569 (LAN side).
Summary of Contents for F@st 1704
Page 1: ...SAGEM F stTM 1704 Reference Manual Edition of October 2009 253 272 861 A ...
Page 2: ......
Page 201: ......
