Sagem F@st 1704 Reference Manual Download Page 113

Page: 113 / 202

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Page 5-77

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.7.10.2 Dynamic

DNS

Object:

Enables a web surfer to access your router (having no fixed IP address but only a
DNS entry) through a dynamic DNS provider such as, for example,

dyndns.org

•

In the

Advanced Setup

menu, select

DNS

then select

Dynamic DNS

The following screen opens:

Refer to the next subsection (Add) for detailed information on the fields of the table.

Note

The "Service" field is automatically filled by the system in "

dyndns

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands