5 - Information / Configuration
Page 5-98
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
Shared
Object:
This level of security enables users of the Wi-Fi network to be authenticated using
their SSID or their WEP key.
In this authentication mode, the WEP key is used to encrypt data.
•
Select the
Shared
security from the scroll down list; the following screen appears:
Field
Action/Meaning
Default value
WEP Encryption
This field is always active (Enabled).
Enabled
Encryption strength
Select
64-bit
or
128-bit
for an encryption at
64 bits or 128 bits respectively.
128-bit
Current network key
Select a key from the four suggested. The
emission key is used to encrypt the data sent
by your computer.
2
Network Key x (1 to 4)
The WEP key is customised for your router.
You may modify the keys by entering them
directly into the boxes.
The characters are "0" to "9" and "A" to "F".
12345678901234
Important
Store the key phrase and the keys in a safe location.
Do not write them in a file on your computer.
Important
The "Key phrase" can consist of up to 15 alphanumeric characters.
To manually configure the encryption key, enter five hexadecimal pairs of digits
for each 64-bit key, or enter 13 pairs for the single 128-bit key (A hexadecimal
digit is a number or letter in the range 0-9 or A-F). Note that the WEP key
protects data transmitted between wireless nodes, but does not protect any
transmissions over your wired network (LAN) or over Internet (WAN) using
Internet Explorer 5.0 or above.
Summary of Contents for F@st 1704
Page 1: ...SAGEM F stTM 1704 Reference Manual Edition of October 2009 253 272 861 A ...
Page 2: ......
Page 201: ......
