Sagem F@st 1704 Reference Manual Download Page 164

Page: 164 / 202

7 - TV over ADSL service

Page 7-2

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Sagem Communication SAS

document. Reproduction and disclosure prohibited

7.1

Introduction

Your router is compatible with TV over ADSL technology.

7.2

Access to the optional TV over ADSL service

To access this service, you must have:

•

made the connection in accordance with section 2.3.4,

•

necessarily taken a subscription with your

nternet

ervice

rovider (ISP)

•

configured one VC (

irtual

hannel) dedicated to video, and another VC dedicated to data

(see screen below)

Note

In the example above, the ATM interface "ppp_8_35_1" is dedicated to data
and the ATM interface "nas_8_50_1" is dedicated to video.

•

configured accordingly “Port Mapping" in

Advanced Setup

(see section 5).

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands