Sagem F@st 1704 Reference Manual Download Page 90

Page: 90 / 202

5 - Information / Configuration

Page 5-54

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.7.6

Security

5.7.6.1 IP

Filtering

Outgoing

Object:

This menu is used to create outgoing IP filters to refuse data from the LAN to the WAN

and list the existing outgoing IP filters.

By default, all the outgoing data is accepted.

•

In the

Advanced Setup

menu, select

Security > IP Filtering >Outgoing

The following screen opens:

Field

Meaning

Filter Name

Name of the filter.

Protocol

Transport protocol.

Source Address / Mask

Source IP address / Subnet mask.

Source Port

Source port

Dest. Address / Mask

Destination IP address / Subnet mask.

Dest. Port

Destination port.

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands