Sagem F@st 1704 Reference Manual Download Page 120

Page: 120 / 202

5 - Information / Configuration

Page 5-84

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.7.14

Interface Grouping

Object:

This menu is used to host a service (Video, Data, SIP) on an interface (ETH or Wi-Fi)

of your router.

•

In the

Advanced Setup

menu, select

Interface Grouping

The following screen opens:

Field

Meaning

Group Name

Group name (see Note).

Enable/Disable

Allows to enable / disable a group of interfaces.

WAN Interface

WAN interface used.

LAN Interfaces

Lists all your router's interfaces.

Note:

Only the "nas_8_50" interface is not resident on the

router. It corresponds to a "Bridge" ATM interface.

Note

By default, all the interfaces are dedicated to data and are associated with the
first VC (

irtual

hannel) existing or created.

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands