Sagem F@st 1704, Reference Manual

Page: 103 / 202

5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-67
Sagem Communications SAS document. Reproduction and disclosure prohibited
Field Action
Traffic Class Name Enter a name for the traffic class you want to create.
Rule Order Select from the scroll down list:
•
Blank
•
Last
•
Number : Number allotted by the system to the
existing rules
Rule Status Select from the scroll down list:
• Disable : QoS disabled for this static class rule
•
Enable : QoS enabled for this static class rule
Class Interface Select from the scroll down list:
•
Local
•
eth0
• wl0
Ether Type Select from the scroll down list:
• IP
•
ARP
•
IPv6
• PPPoE_DISC
•
PPPoE_SES
•
8865
• 8866
•
8021Q
Source MAC Address Enter a "Source" MAC address.
Source MAC Mask Enter a "Source" MAC mask.
Destination MAC Address Enter a "Destination" MAC address.
Destination MAC Mask
Enter a "Destination" MAC mask.
Assign Classification Queue Select from the scroll down list:
•
Blank
•
Number: Priority number and associated queue
number, defined by the system starting from the
“Queue Precedence” (see subsection 5.7.8.1).
Mark Differentiated Service Code
Point (DSCP)
Select the type of Differentiated Services Code
Point (DSCP) mark to be allocated (6-bit coding)
from the scroll down list.
Default to CS7: 000000 to 111000
Mark 802.1p priority Select Blank or a priority value between 0 and 7
from the scroll down list.
Tag VLAN ID Enter a value from 0 to 4094.