Sagem F@st 1704 Reference Manual Download Page 159

Page: 159 / 202

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Page 5-123

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.10.6

Update Software

Object:

This menu lets you update the latest version of the router software.

•

In the

Management

menu, select

Update Software

The following screen opens:

Proceed as follows to update your router's software version:

•

Enter the path then the name of the software version file,

•

Click on the

Browse

button and select the path then the software version file,

•

Click on the

Update Software

button to update the software version.

Note

The process takes around 2 minutes.

The application of a new software version for the router does not modify
the current configuration at all.

Important

Throughout the download procedure (up to five minutes), you must:

- not power down the router

- not disconnect from the ADSL line.

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands