Sagem F@st 1704 Reference Manual Download Page 133

Page: 133 / 202

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Page 5-97

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.8.2.1 Network

Authentication

Note

The scroll down list in the

Network Authentication

field shows the following

possible authentication types:

•

Open

•

Shared

•

802.1x

•

WPA

•

WPA-PSK

•

WPA2

•

WPA2-PSK

•

Mixed WPA2/WPA

•

Mixed WPA2/WPA-PSK

A different screen appears for each authentication type.

Open

Object:

The

Open System

authentication enables all users of the Wi-Fi network to

authenticate themselves with the router. No restrictions concerning security are
demanded.

In this authentication mode, only the WEP key may be used to encrypt data.

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Sagem F@st 1704, Reference Manual, Page: 133 / 202

Search results

Summary of Contents for F@st 1704

Reviews: