Sagem F@st 1704 Reference Manual Download Page 123

Page: 123 / 202

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Page 5-87

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.7.15

LAN Ports

Object:

This menu is used to enable or disable the Virtual LAN ports feature.

•

In the

Advanced Setup

menu, select

LAN Ports

The following screen opens:

•

If the box is unchecked, the Ethernet 1 to 4 (ENET (1-4)) ports are gathered and seen like
only one virtual port.

•

When the box is checked, these ports are independently seen but a fall of the performances
of the transfers between ports is noted.

By default

, this feature is disabled (box not checked).

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands