Sagem F@st 1704 Reference Manual Download Page 14

Page: 14 / 202

1 - Introduction

Page 1-4

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Sagem Communications SAS

document. Reproduction and disclosure prohibited

1.2

Composition of router pack

The router is supplied in a pack the composition of which changes according to the pack
content requested:

Item

Description

SAGEM F@st

1704 router

Mains adapter

ADSL RJ11/11 FDT line cable (length = 3 m) used to connect your router to your
telephone line

Ethernet RJ45/RJ45 cable (length = 1.75 m) used to connect your router to the Ethernet
port of your computer

Quick Installation Guide

Installation CD-ROM

Filter/Splitter used to connect one phone set and your router to your telephone line*

Microfilter used to connect another phone set to your telephone line*

802.11g USB Wi-Fi key*

* Option depending on pack content requested

The CD-ROM contains:

•

the application for installing the USB interface.

•

the Reference Manual (SAGEM F@st

1704) in PDF format file.

•

the CE declaration of the router.

Note

Incomplete or damaged supply.

If on its receipt the equipment is damaged or incomplete, contact your supplier.

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands