Sagem F@st 1704 Reference Manual Download Page 42

Page: 42 / 202

5 - Information / Configuration

Page 5-6

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.5

Device Info

Clicking on this heading displays the following menus:

•

Summary (see subsection 5.5.1)

•

WAN (see subsection 5.5.2)

•

Statistics (see subsection 5.5.3)

•

Route (see subsection 5.5.4)

•

ARP (see subsection 5.5.5)

•

DHCP (see subsection 5.5.6)

5.5.1

Summary

Object:

This menu lets you display the current status of your Internet connection.

•

In the

Device Info

menu, select

Summary

The following screen opens:

Note

This screen also appears in the welcome screen (see subsection 5.1).

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands