Annex A - Troubleshooting
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page A-7
Sagem Communications SAS
document. Reproduction and disclosure prohibited
A.5
Interpreting the LEDs
A.5.1
The "ADSL" LED blinks slowly
1.
Check the connection of your ADSL filters. Each telephone socket of your installation which
is used must be equipped with an ADSL filter.
2.
Check that the RJ11 type line cord delivered with your router is connected to one of your
sockets. It is recommended that no telephone extension is used.
3.
Finally, check with your ISP that the ADSL service is available on your telephone line.
A.5.2
"Wi-Fi" LED off
If this LED is off, this indicates that the WLAN interface of the router is not active.
To activate the wireless network, access the HTTP configuration tool and check the box "Enable
Wireless" in the
Wireless
menu (see section 5).
A.5.3
All LEDs are off
1.
Check that the type of power available in your premises is compatible with the mains
voltage required for powering your router.
2.
Check that the delivered power cord is properly connected at one end to the mains power
network.
3.
Check that the power connector is inserted correctly in the corresponding connector (power)
of the router.
Summary of Contents for F@st 1704
Page 1: ...SAGEM F stTM 1704 Reference Manual Edition of October 2009 253 272 861 A ...
Page 2: ......
Page 201: ......
