Sagem F@st 1704 Reference Manual Download Page 72

Page: 72 / 202

5 - Information / Configuration

Page 5-36

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Sagem Communications SAS

document. Reproduction and disclosure prohibited

Field

Action

Default value

PPP Username

Enter your connection ID.

This information is provided to you by your

nternet

ervice

rovider (ISP).

PPP Password

Enter your connection password.

This information is provided to you by your

nternet

ervice

rovider (ISP).

Authentication

Method

Select the authentication method of your choice from the
scroll down list:

•

AUTO,

•

PAP,

•

CHAP,

•

MSCHAP.

AUTO

Dial on demand

(with idle timeout

timer)

Check the box to only connect to the Internet on "Traffic".

Not checked

Inactivity Timeout

(minutes) [1-4320]:

Enter the inactivity time. This value (in minutes) is
between 1 and 4320 (i.e. 72 hours).

This field only appears when the "Dial on demand (with idle timeout timer)" field is activated (box checked).

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands