Sagem F@st 1704 Reference Manual Download Page 151

Page: 151 / 202

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Page 5-115

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.10.1.2 Update

Object:

This menu enables the router to recover a configuration which has already been

saved to a file with a .conf extension.

•

In the

Management

menu, select

Settings

then

Update

The following screen opens:

Proceed as follows for your router configurer to display a configuration which has already been
saved:

•

Enter the path then the name of the configuration file.

•

Click on the

Browse

button and select the path then the configuration file.

•

Select the configuration file then click on the

Update Settings

button to recover a

configuration which has already been saved.

Note

The process takes around 2 minutes.

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands