Sagem F@st 1704 Reference Manual Download Page 109

Page: 109 / 202

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Page 5-73

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.7.9.4 RIP

Object:

The "RIP" protocol (

outing

nformation

rotocol) lets you tell routers the distance

(number of hops) which separates them.

This protocol only takes account of the distance between two machines in terms of
hops.

•

In the

Advanced Setup

menu, select

Routing

then select

RIP

The following screen opens:

Field

Action/Meaning

Default value

Interface

Created or native interface.

Version

Select the RIP version of your choice from the
scroll down list.

•

: for RIP1

•

: for RIP2

•

Both

Operation

Select the operation in the scroll down list:

•

Active

: to transmit the routing information

to the other routers and receive it from them

•

Passive

: to listen to the

RIP

broadcasts

and update its routing table, but not indicate
its own routes (silent mode)

Passive

Enabled

Check the box to activate the "RIP" function on
the corresponding interface.

Not checked

Summary of Contents for F@st 1704











































































































































































































Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands

Sagem F@st 1704, Reference Manual

Search results

Summary of Contents for F@st 1704

Reviews:

Related manuals for F@st 1704

Brands by name

Popular brands