Safegate Group safedock, User Manual

Page: 49 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 2 INSTALLATION Version: 2.7
Page 17 of 26
The table below lists the scanning angles of the Safedock unit for the forward and the
side scanning areas.
Scanning Area Vertical Scanning Angle Horizontal Scanning Angle
Forward area +15°; -24°
+ means upward +30°; -30° (T1) or +13°; -13°
(T2/T3)
Side area + 5°; - 5 ° +2°; +8° (forward)
The calibration plate must also be mounted at least 3 metres from the Safedock unit,
and there should not be any objects behind it for at least two metres.
The calibration plate must be sized as per below table for good performance. The
minimum distance for the calibration plate is 3m from the Safedock unit. The
maximum distance for the calibration plate is 30m.
Recommended minimum dimensions of a calibration plate:
Distance Size
3-10m 0.3m
10-20m 0.4m
20-25m 0.5m
25-30m 0.6m
The calibration plate must be located within the Safedock
unit’s field of vision.
The field of vision is:
FIGURE 2.17 CALIBRATION CHECK
8°
2° Safedock
30°
30°
13° 13°
T2/3
T1