Safegate Group safedock, User Manual

Page: 100 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 3A Operating Procedures Version: 2.7
Page 12 of 30
1.11 STATUS INFO
Description Position
If the Safedock system is provided with optional support of CHOCKS
ON , GPU On (for Ground Power Unit or 400Hz), PCA ON (for PC-Air)
or other status messages, they will be displayed on the Pilot Display
upon Operator Panel key selection, external button or actual sensed
conditions (if connected) after the aircraft reaches the stop-position
and is parked. The
CHOCKS ON status is provided via button press
on the Operator Panel or a separate button. Status messages will be
displayed one after the other and continue until a programmed timeout
expires.
Image
Operator Panel
Image Pilot Display
T1-42 T2-18 T2S-24 T3-9 T3-15
1.12 PARK ON
Description Position
If a docking procedure cannot automatically come to a PARKED state,
the Marshal can manually set this from the Operator Panel. (It is
required for enabling the following PARK-OFF procedure.)
The sequence is started with the Safedock system in the quiescent
state and the Operator Panel showing the message
SAFEDOCK
SYSTEM READY .
Instructions to Operators:
To initiate the operation press Park On key.
Determine aircraft for docking:
i. Press the desired aircraft type key.
ii. Press the exact sub-type key, if required (press left-right
arrows to show all listed sub-types).
iii. (option) Enter the 4-digit operation-level password
System enters Parked state:
i. The system verifies that an object matching the selected
aircraft is present at the stand.
<Aircraft type> <Flight>
PARKED
Shut
down