Safegate Group safedock, User Manual

Page: 208 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 4A Stand Configuration Utility Version: 2.7
Page 22 of 26
4.8.6.1 Legacy Generics
In older versions of Safedock, there were several generic aircraft types that are not
included in today’s normal set of aircrafts. However, it may still be desirable to use
those aircraf
ts. Therefore, they are provided via the “Add Legacy Generics” button.
Pressing this button will switch the view of the generics to a list of available generics
that can be imported into the current configuration. Check those you want to import
and press the “Add Selected” button. Pressing “Cancel” will bring you back to the
original view without adding any generics.
Note that the list of available generics is filtered so that it only shows aircrafts which
Legacy GOS Id is not already present in the configuration.
4.8.7 Legacy A/C-id (GOS)
This tab shows a list of all aircrafts (column 1) and their GOS-ids (column2) available
in the old version of Safedock together with the name (column 3) of the profile in the
current configuration that matches (through GOS id) and the configuration id (column
4) that goes with it.
Password
The Safedock system can be equipped to use password protection for operator and/or
maintenance (remote) operations.
More specific, the system would require a four-digit password at the following
commands:
(a)
Local Start of Docking (by assigning an aircraft type)
(b) Local Park ON or Park OFF (creating Blocks On and Blocks Off transactions)
(c) Confirmation of a Scheduled Flight Start-of-docking Command from Superior
System
(d) Aircraft Loading Bridge Lock Override (if installed)
(e) Diagnostic Test Procedure (requires a maintenance operator password)
FIGURE 4A.16 - PASSWORD FEATURE