Safegate Group safedock, User Manual

Page: 148 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 4 MAINTENANCE Version: 2.7
Page 14 of 52
4.3.14 Set IP
The Set IP function is used to inspect and modify the network settings for the system.
FIGURE 4.18
– IP SETTINGS
Press the Set xxx key to modify the IP-address, network mask and Gateway address
respectively.
FIGURE 4.19
– IP ADDRESS SETTING
Enter new digits for the setting. The input position is marked by an input cursor, ^.
Move the input cursor with the

and

keys. Confirm the new setting by pressing
ENTER .
Activate the modified setting for the system by pressing the
Apply key. The system
will restart using the new settings.
4.3.15 Restart
The restart function can be used to restart the Safedock system.
FIGURE 4.20
– RESTART
Press Accept to confirm the restart operation, press CANCEL or Back to resume
normal operation.
Back
IP Settings
Msk: 255.255.255.0
Adr: 192.168.1.11
Set
addr Set
gtway Apply Set
mask
6 8
9
0 7
IP Address:
^
192.168.001.021
1 3
4
5
2
Back
CONFIRM RESTART
Accep
t