Safegate Group safedock, User Manual

Page: 144 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 4 MAINTENANCE Version: 2.7
Page 10 of 52
FIGURE 4.4
– LASER TEST
4.3.4 Scan Test
This function is used to test the entire scanner subsystem with mirrors, LRF and
monitoring functions.
A full scan operation will be performed using each of the mirrors and a message will
display the result including monitor time indicators for each mirror.
FIGURE 4.5
– SCAN TEST
The time indicators for the mirrors, nn and mm, shall be in the range 100
– 600.
4.3.5 Display Test
There are three available tests for the Pilot display: Board test, Address test and Line
test.
FIGURE 4.6
– DISPLAY TEST
(a) Board Test
This is an automatic test. Each LED board of the Pilot Display will be tested one
by one, and the result will be displayed at the Operator Panel. If any LED board is
found to be faulty, it will be displayed as a major or minor (individual LEDs) error
with its
id ‘RC’ where R is row number and C is column number:
FIGURE 4.7
– BOARD TEST
(b) Addr Test
In address test, a unique character is displayed on each of the display boards,
starting with ‘A’ at the top left and continuing in sequence left-to-right and top-to-
bottom.
Thus the addressing of the boards can be checked:
Walk
Test OP
Test Light
Sens Temp
Sens View
Logs
Program version
L: Hor OK Ver OK
SOS 1.0.0
Mirr
Pos Laser
Test Scan
Test Disp
Test Mirr
Test
Walk
Test OP
Test Light
Sens Temp
Sens View
Logs
Program version
S: OK H nn V mm
SOS 1.0.0
Mirr
Pos Laser
Test Scan
Test Disp
Test Mirr
Test
Back
DISPLAY TEST
Board
Test Line
Test Addr
Test
Back
BOARD TEST
Major: 11 34
FAILED
Board
Test Line
Test Addr
Test