Safegate Group safedock, User Manual

Page: 147 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 4 MAINTENANCE Version: 2.7
Page 13 of 52
‘kk’ is the light intensity
measured, and ‘nn’ is the
control parameter used.
(3 < nn < 99; 0 < kk <
60000).
FIGURE 4.13
– LIGHT SENSOR TEST
4.3.10 Temperature Sensor Test
This test function is used to check the temperature of the display unit (D) and the
scanner unit (L). The display shows the measured temperature, according to the
format below:
‘nn’ is the temperature, in
degrees Celsius.
FIGURE 4.14
– TEMPERATURE
4.3.11 Comm info
This test indicates the status of the communication with the superior system.
FIGURE 4.15
– COMM INFO
4.3.12 Statistics
This function displays some basic statistics about the system operation.
FIGURE 4.16
– STATISTICS
The keys
Laser Time , Total Dock , Ok Dock and ID Fails switch between the
different statistics.
The function
Reset Laser is used to reset the running time counter for the laser unit.
This time should be reset whenever the laser unit is replaced in the system.
4.3.13 Cal Test
This key will activate the system calibration procedure and report the result.
FIGURE 4.17
– CAL TEST
Walk
Test OP
Test Light
Sens Temp
Sens View
Logs
Program version
Light: nn (kk)
SOS 1.0.0
Mirr
Pos Laser
Test Scan
Test Disp
Test
Mirr
Test
Walk
Test OP
Test Light
Sens Temp
Sens View
Logs
Program version
Temp: D nn, L nn
SOS 1.0.0
Mirr
Pos Laser
Test Scan
Test Disp
Test
Mirr
Test
Back
Superior Comm:
Channel 2 Inactive
Channel 1 Active
Reset
Laser
Back
Number of ID-Fail:
2
Laser
Time Ok
Dock ID
Fails
Total
Dock
Walk
Test OP
Test
Light
Sens
Temp
Sens View
Logs
Program version
AutoCal: OK
SOS 1.0.0
Mirr
Pos Laser
Test
Scan
Test
Disp
Test Mirr
Test