Safegate Group safedock, User Manual

Page: 178 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 4 MAINTENANCE Version: 2.7
Page 44 of 52
WARNING! DANGER OF ELECTRIC SHOCK. THE ELECTRICAL CONNECTIONS
MAY BE LIVE. DO NOT PLACE ANY TOOL INSIDE THE CONTROL RACK.
(a) Switch power OFF and isolate the power supply unit.
(b) To gain access to the motor control boards, loosen the four self-retaining screws,
on top of the cover plate, which secures the protective cover plate.
(c) Withdraw the motor control board. The two motor boards are equivalent.
6.7.2 Assembly
(a) Ensure the DIP switch positions, located on the control boards, and are set
correctly. The switch settings have to correspond with the setting of the removed
control board.
(b) Carefully insert and locate the motor control board. Tighten the screw.
(c) Fit and secure the protective cover plate, using the four self-retaining screws.
6.7.3 Testing
(a) Switch ON power to the system.
(b) Start a docking procedure. The system will perform a calibration control and a
self-test.
(c) If the system fails during the calibration control test, undertake a new calibration
procedure, according to Chapter 4A Stand Configuration Utility.