Safegate Group safedock, User Manual

Page: 11 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: INTRODUCTION Version: 2.7
Page 9 of 9
Term Description
Operators Panel/
Operators Control
Panel The operator panel is the primary source for operator input to the Safedock
system. It consists of an LCD display for status information and function
keys for operator input.
Scheduled Docking A pre-planned incoming flight, consisting of Aircraft type, flight number,
stand and scheduled/estimated/actual time of arrival. Superior System can
use this information to initiate the docking procedure at the appropriate
stand. The Scheduled docking will be presented at the Safedock system,
for approval by the Marshal or handling agent.
Stand configuration file A complete configuration for a Safedock system can be stored on disk in a
stand configuration file. This file can be used to review and/or to document
the stand configuration. The file can also be used to restore the
configuration for a in case of a hardware breakdown.
Stand Setup/
Stand configuration The process of configuring a stand for operation. This process includes
defining the centreline to use and selecting the aircraft types and their stop
positions.
Superior System Gate Operating System or SafeControl
– Apron Management System.
Tracking/
Tracking Mode The Safedock system has found an incoming aircraft, and is in the process
of leading it to the predefined stop position.
Walk test A test procedure used to verify the operation of a Safedock system.