Figure 4.58
SNMP allowed hosts configuration
1.
SNMP host list –
shows the list of available v1/v2 SNMP hosts; adds or deletes the
host IP address to the CFIP SNMP v1/v2 host table. If the SNMP host connected to
the CFIP is not added to the CFIP SNMP v1/v2 host table, the CFIP will not respond
to the SNMP requests from that host. If
„Rollback on”
is selected, configuration will
be reverted in case of erroneous configuration changes applied.
2.
Allows to add or delete SNMP host IP addresses from the list (command line –
snmp
host
{add | delete | list | reset} <ipaddr>
and
snmp2 host
{add | delete | list | reset}
<ipaddr>
);
3.
Reset SNMP host(-s) – deletes all SNMP managers’ IP addresses from the list;
4.
Writes to configuration file all the changes made on the whole page (command line
–
cfg write
);
5.
System returned -
in case of error or incorrectly entered parameter value, or other
problems in the whole page – info message will be displayed here. Otherwise it says
“Ok”.
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
80
