Figure 2.7
Web Interface - main window with section numbering
2.3.5
Command Execution
There is “IP configuration” page shown in
Figure 2.8.
The entire page is divided into smaller
fragments:
1.
The header of page;
2.
Sub-header of single type configuration parameters;
3.
Execution controls related to a single type configuration parameters.
4.
„Execute configuration”
button executes configuration changes only on the local side CFIP
PhoeniX, but “Execute for both” executes configuration changes on both remote and local
side of CFIP PhoeniX link. Enabling rollback feature allows going back to previous
configuration in case of management connectivity loss.
5.
Write to config file button, which generates “
cfg write
” CLI command, which saves changed
configuration;
6.
Configuration parameter name;
7.
Configuration parameter
current
value;
8.
Comments (not on every page).
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
24
