9.
You can add VLANs by entering preferable VID, enabling appropriate port, choosing
VLAN type and pressing “Add” button (command line –
ethernet vlan
<N[ -
N]> {Delete} | {Port <port list [1[u]] [2[u]] [3[u]] [4[u]] [5[u]] [6[u]]>
);
10.
Reset VLAN(-s)
– resets the whole VLAN configuration (command line –
ethernet
vlan reset
);
11.
Writes to configuration file all the changes made on the whole page (command line
–
cfg write
);
12.
System returned
- in case of error or incorrectly entered parameter value, or other
problems on the whole page – the info message is being shown here. Otherwise it
says “Ok”.
4.8.1
Ethernet Switch Port Status and Settings
Figure 4.43
Ethernet switch ports
Switch LAN ports 1, 2, 3 and 4 are connected to LAN interface.
Switch WAN port is connected to WAN interface, modem and radio part.
Switch Mng port is connected to LAN Management CPU.
4.8.2
Ethernet Switch VLAN Status and Settings
Figure 4.44
System without VLANs
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
69