4.
By pressing
„Execute configuration”
changes made to the corresponding section
apply only for the local side;
5.
VLAN (1 – 4094) –
map VLAN ID or VLAN IDs range for each instance. Up to seven
instances;
6.
Write to config file -
saves to configuration file all the changes made on the whole
page (command line –
cfg write
);
7.
System returned -
in case of error or incorrectly entered parameter value, or other
problems on the whole page – the info message is being shown here. Otherwise it
says “Ok”.
4.10.3
Spanning Tree Protocol statistics
Spanning tree protocol statistics summarizes STP statistics on all available switch ports.
Figure 4.56
Spanning Tree Protocol Statistics
1.
Rx MSTP BPDUs –
displays how many MSTP BPDUs packets received;
2.
Rx RSTP BPDUs –
displays how many RSTP BPDUs packets received
3.
RX Conf BPDUs
– displays how many STP BPDUs packets received;
4.
RX TCN BPDUs
– displays how many topology changing notification BPDUs packets
received;
5.
Bad MSTP BPDUs
– displays how many bad MSTP BPDUs packets received;
6.
Bad RSTP BPDUs
– displays how many bad RSTP BPDUs packets received;
7.
Bad Conf BPDUs
– displays how many bad STP BPDUs packets received;
8.
Bad TCN BPDUs
– displays how many bad topology changing notifications BPDUs
packets received;
9.
Tx MSTP BPDUs
– displays how many MSTP BPDUs packets send;
10.
Tx RSTP BPDUs
– displays how many RSTP BPDUs packets send;
11.
Tx Conf BPDUs -
displays how many STP BPDUs packets send;
12.
Tx TCN BPDUs
– displays how many topology changing notification BPDUs packets
send;
13.
Fwd Transitions
– displays how many times port has been changed to forward
status;
14.
Times Since Top Chg
– displays time since last topology change in HH:MM:SS;
15.
Top Change Count
- displays total change count for all port;
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
78