Proprietary notice
The information presented in this guide is the property of SAF Tehnika, JSC. No part of this document
may be reproduced or transmitted without proper permission from SAF Tehnika, JSC.
The specifications or information contained in this document are subject to change without notice due
to continuing introduction of design improvements. If there is any conflict between this document and
compliance statements, the latter will supersede this document.
SAF Tehnika, JSC has no liability for typing errors in this document or damages of any kind that result
from the use of this document.
To get up to date information about accessories and their availability, please contact sales
representative.
Note:
FODU/ODU does not contain serviceable parts. Warranty will not be applicable in the
event FODU/ODU has been hermetically unsealed.
Note:
SAF Tehnika, JSC is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the
equipment.
Copyright Notice
Copyright © 2015 SAF Tehnika, JSC. All rights reserved.
1
Overview
This document briefly describes the
CFIP PhoeniX
series
TDM/IP split mount system
(IDU+ODU)
covering the built-in management system, configuration functionality, hardware features, etc.
1.1
CFIP PhoeniX TDM/IP split mount system
CFIP product family
is the new next generation product line which is targeting growing demands for
data transmission over microwave radio.
As a result the primary traffic interface for CFIP split mount system is Gigabit Ethernet. As CFIP is
capable of providing bit rate of
up to 363Mbps
, it is a great addition to SAF portfolio. CFIP radio and
modem performance allows achieving high system capacity by employing 256-decision states
modulation scheme by user’s choice. Apart from the
full system capacity of 363Mbps
, it is possible to
configure the radio to any of 3.5, 7, 14, 28, 40 and 56 MHz channels as well as to any of
4QAM, 16QAM
,
32QAM, 64QAM, 128QAM and 256QAM modulations
, thus providing various capacities to suit
particular needs.
SAF Tehnika has employed most modern design solutions and components to create high performance
split mount system with
low power consumption
– 33-69W per system.
CFIP is a perfect building block for any modern future proof wireless network, including mobile service
providers, fixed data service operators, enterprise customers, municipal and governmental networks
among others.
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
5
