15.
Saved configuration file - shows contents of system configuration file saved in
EEPROM memory. Commands contained in this configuration file are executed at
every system start-up;
16.
Running configuration file - shows currently running system configuration file
(command line –
eth config
). In order to save current configuration use command
cfg write
;
17.
File system content
– shows contents of internal flash memory (command line –
tfs
ls
);
18.
Write to config file
– saves all changes made (command line –
cfg write
);
19.
Write to config file for both
– saves all changes made for local and remote side
(command line –
cfg write
);
20.
System returned -
in case of error or incorrectly entered parameter value, or other
problems in the whole page – the info message will be displayed here. Otherwise it
says “Ok”.
6.2
License Management
License management allows specifying data transmit parameters and functionality for specific
time period or for unlimited time.
CFIP without licensing option will operate with full functionality, but CFIP with licensing option
but without activated licenses will operate with minimum functionality (Limited 4QAM modulation).
Functionality may be expanded using appropriate license key.
Explanation of fields:
Additional commands for script editing in Telnet/serial interface
Command
Description
Cfg load
Loads the configuration script from EEPROM into RAM.
Cfg clear
Clears the script stored in RAM.
Cfg insert
<line> <cmdline>
Inserts typed command line with specified line number into
configuration script stored in RAM.
Cfg cmd
<file with commands>
Restarts CPU of management controller and loads configuration
script from the specified file.
Cfg group
Groups commands in configuration script.
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
102
