Figure 5.5
Alarm threshold configuration window
5.1.6
Alarm Management Commands
To manage alarms in command prompt, the commands are as follows:
Alarm management commands
Command
Description
Log show
[
<start line>
]
The management controller maintains event log, - events include
configuration changes, management controller restarts, and local
site alarm changes.
The “
log show
” or “
log
” commands display the latest 20 log
entries, the log entries are numbered, - entry with the largest
number is the latest event. The “log show” command can be
followed up with an entry number to display the latest 20 entries
beginning from the entry specified by the number, e.g., “
log show
100
” will display entries 100…120.
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
86