Figure 2.17
PuTTY serial prompt
Password is disabled by default. See Chapters 3...7 for available commands.
2.4.2
Telnet connection
The Telnet connection to the CFIP PhoeniX is carried out using the Ethernet management
connection. Please refer to Chapter 2.3.2 for Ethernet management port connection details.
You can use any Telnet client. Below are connection steps with
PuTTY
-
Windows
freeware
software.
1)
Open
PuTTY
, choose “Connection Type”: “Telnet”, enter IP address and make sure that
correct port number is used (“23” by default):
Figure 2.18
PuTTY configuration - 3
2)
Press “Open”, enter login credentials (default user name is
admin
and password -
changeme
).
After successful login following prompt should appear:
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
31
