•
IE v. 6.0
•
Mozilla Firefox v. 2.0.0.11
•
Google Chrome
Figure 2.4
Supported browsers: “Internet Explorer”, “Mozilla Firefox” and “Google Chrome”
After web browsers selection, open it and enter address of the CFIP PhoeniX IDU (
Figure 2.5
).
(!)
The IP address of CFIP PhoeniX IDU is
192.168.205.10
Figure 2.5
CFIP PhoeniX IP address
(!)
The default username and password for Web access are:
–
username:
admin
–
password:
changeme
If the IP address is correct and you have suitable browser version, you will see confirmation text.
After confirmation you will be redirected to Web interface page. In case of not valid IP address you
will not obtain the configuration interface. In case your browser is not accepted, you will see the text
informing about that. You can push the button “Continue Anyway” to be redirected to Web interface
page.
At first “Configuration
Configuration wizard” should be run in order to perform basic link
configuration (by default Tx power is disabled and parameters of remote side will not be seen).
If configuration was made correctly, you will see the main window of the WEB Interface. If in the
field displaying Local and/or Remote system values there are problems (configured values are not the
same for Local and Remote, or there is a problem with parameter value), the appropriate cell will be
highlighted in red colour.
(!)
If you are not obtaining the correct Web page, try to clear browser cookies, cache and offline
data and restart the browser.
(!)
All the commands executed from Web GUI will be interpreted CLI commands and will be
executed as in CLI.
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
22
