Example of configuration for HSB mode:
Figure 4.14
CFIP PhoeniX configuration for 1+1 HSB mode
After successful 1+1 HSB configuration, the screen of ‘Protection configuration’ in Web GUI
should look as follows:
Figure 4.15
Protection configuration window after successful HSB configuration
Configuration for 1+1 Space Diversity Mode
For 1+1 SD mode it is necessary to:
•
Assign different IP addresses for each IDU. Note that IP addresses should have the same
subnet;
•
Set the same Tx frequency pair for working and protection link;
•
Set appropriate state (working/protection) for each IDU;
•
Disable automatic remote IP address identification (set by default) in “Tools
Command
line” with command “modem ipremote off” and set appropriate remote site IP address for
each IDU in “Configuration
IP configuration”: “Remote IP address” for local working IDU
is “IP address” of remote working IDU and “Remote IP address” for local protection IDU is
”IP address” of remote protection IDU;
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
51
