Figure 5.9
Performance log configuration window
The main advantage in terms of demonstration means is obtained from ‘Performance graphs’,
which are found in ‘Performance
Performance graph’ section.
You are able to choose between 9 parameters – Rx level; Tx level; Radial MSE; LDPC stress;
Modem temperature; IDU temperature; ODU temperature; PSU input voltage and PSU power
consumption – and to view their graphs. It is possible to choose between 8 scales – from 12 last
minutes to the maximum of 6 last days to be displayed in the graph. It is also possible to choose time
period to be displayed, defining date and time till which the graph will be shown.
Figure 5.10
Performance graph showing system temperature and Rx level in period of last 6 hours
1.
10.
9.
5.
7.
8.
6.
4.
2.
3.
11.
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
90