Figure 4.53
DSCP mapping
1.
DSCP mapping –
allows assigning queues for different DSCP classes. You may have
up to 64 different traffic DSCP classes;
2.
By pressing
„Execute configuration”
changes made to the corresponding section
apply only for the local side CFIP PhoeniX. If
„Rollback on”
is selected, configuration
will be reverted in case erroneous configuration changes are applied.
3.
Writes to configuration file all the changes made on the whole page (command line
–
cfg write
);
4.
System returned -
in case of error or incorrectly entered parameter value, or other
problems on the whole page – the info message is being shown here. Otherwise it
says “Ok”.
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
75
