Figure 2.13
STEP 4 Checking settings and executing configuration
To verify the settings, we can go to ‘Status’ or the main screen, which is the first option in the
navigation panel. If there are no ‘red fields’, everything is set correctly and the link is up.
2.4
Command Prompt Interface
CFIP equipment can be monitored and configured by using command interface described in this
chapter.
This process is performed by connecting to Telnet terminal via Ethernet management port;
Telnet management supports only one client.
Command line management interface offers the wider configuration and monitoring
functionality. The available commands for Telnet management are found in detailed explanation of
Web GUI windows, as well as in tables of additional commands.
(!)
−
To end Telnet session press Ctrl+D. Opening the session again, the prompt will appear to enter
username and password.
−
Default username is
admin
and password -
changeme
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
28