Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 42 / 410

28
Installation & Setup
Rack Mount Installation
Rack Mount Installation
The ZoneSwitch may be mounted in an EIA standard size 19-inch rack.
Attach the L-shaped mounting brackets to the left and right sides of the ZoneSwitch. Line
up the mounting bracket holes to the chassis screw holes. Use a Phillips #1 screwdriver
and the included eight chassis screws (flat-head Phillips screws) provided in the mounting
kit to secure the mounting brackets to the chassis
Insert the ZoneSwitch into any available 1RU slot on the 19-inch rack. Line up the screw
holes on the mounting brackets to the holes on the rack. Use a Phillips #1 screw driver and
the included four rack screws (round-head Phillips screws) provided in the mounting kit to
secure the mounting brackets to the rack.
NOTE:

Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack environment may be greater than room
ambient. Therefore consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature.

Reduced Air Flow - Installation of the equipment in a rack should be such that the amount
of air flow required for safe operation of the equipment is not compromised.
