Ruckus Wireless ZoneSwitch 4124 User Manual Download Page 24

Page: 24 / 410

Introducing Ruckus Wireless ZoneSwitch

Hardware Features

• Supports half duplex and full duplex modes and auto-negotiation for all 24-10BASE-

T/100BASE-TX/1000BASE-TX ports.

• ZS4124 supports IEEE 802.3af over all 24 ports, total POE power budget 180W.

• ZS4224 supports IEEE 802.3at over all 24 ports, total POE power budget 375W.

• MDI/MDI-X auto-sense on all ports and IEEE 802.3ab Auto MDI/MDI-X on all 100/

1000M twisted-pair ports.

• Provides flow control mechanism to ensure zero packet loss. Uses back pressure for

half-duplex operation and IEEE802.3x for full duplex operation.

• Non-blocking, Store-and-Forward switching mechanism.

Summary of Contents for ZoneSwitch 4124



























































































































































































































































































































































































































Search results

Summary of Contents for ZoneSwitch 4124

Reviews:

Related manuals for ZoneSwitch 4124

Brands by name

Popular brands

Ruckus Wireless ZoneSwitch 4124, User Manual

Search results

Summary of Contents for ZoneSwitch 4124

Reviews:

Related manuals for ZoneSwitch 4124

Brands by name

Popular brands